Unlike many low-priced LED bulbs, Cree LED bulbs are easily dimmable with most standard incandescent dimmers. … The Cree LED light bulb (40-watt incandescent replacement) delivers 450 lumens and consumes only 6 watts and is available in 2700K color temperature.
Are all LED light bulbs dimmable?
The short answer: it depends. Not all LED lights are dimmable, so you need to check two things to be sure. … These are designed to work with a high wattage, so they don’t work for low wattage LED bulbs. You’ll need to replace this dimmer with a trailing edge dimmer, which is designed to work with low voltage LED lights.
Can non dimmable LED bulbs be dimmed?
Many retrofit LED lamps are sold in two versions; dimmable and non-dimmable. … You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit.
What is the difference between LED and Cree LED?
Unlike compromised bulbs, the new Cree LED® bulb delivers an even better light with better performance, a longer life and more energy savings. … It has an improved longer lifetime of over 27 years (30,000 hours), lasting as much as six times longer than some LED bulbs.
Can you use LED bulbs with a dimmer switch?
Use an LED Dimmer switch
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
How do I know if my LED bulbs are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.
Is it OK to use dimmable bulbs without a dimmer?
The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.
Do I need a special dimmer for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
Why do my dimmable LED lights flicker?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … Some switch manufacturers make dimmer switches that they claim to work well with LED bulbs. It’s a simple project to switch out a dimmer switch, and it might prevent you from having a seizure!
Are Cree LEDs the best?
CREE – The best of the very best, CREE LEDs are like the Apple in the world of LEDs, or we like to think of it that way anyway. CREE’s are super high-performing, energy-efficient LEDs which provide a crisp, but low-glare output.
Which is better Cree or COB LED?
The CREE LED lighting system has a larger size and a PCB area that is wider than its COB counterpart. Both of the LEDs generate large quantities of heat when they are both being used. … By being wider and bigger, CREE can dissipate a higher volume of heat into its environment. This simply means that it is longer-lasting.
What is better cob or LED?
But the difference between LED light COB and SMD is that COB LEDs have more diodes. COB chips typically have 9 or more diodes. … COB is known for better lumen-per-watt ratios and heat efficiency. This has a lot to do with the design of COB LEDs, and the cooling ceramic substrate of the chips.
What dimmer switch do I need for LED lights?
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
How many LED lights can you put on a dimmer?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.
Are LED lights bad for your eyes?
The “blue light” in LED lighting can cause damage to the eye’s retina and also disturb natural sleep rhythms, according to a new report. … “Exposure to an intense and powerful (LED) light is ‘photo-toxic’ and can lead to irreversible loss of retinal cells and diminished sharpness of vision,” it said.