As the use of LED has increased, SATCO posts a list of approved dimmers for each light and fixture. … These dimmers consider the lower voltage use of LED lamps and help to reduce visible flicker.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Can you put LED bulbs on a dimmer?
Well, the answer depends: Yes, LED lights work on a dimmer when: You have “dimmable” LED light bulbs. You use an LED compatible dimmer.
How can I tell if a LED bulb is dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.
Which LED bulbs are best for dimmers?
Best dimmable: Philips 60W Equivalent Soft White A19 Dimmable LED Light Bulb. Best vintage-style: GreenSun LED Lighting 40W Vintage Edison Bulbs. Best CFL: GE CFL 15W Fluorescent 60W Replacement Light Bulb.
Is it OK to use dimmable bulbs without a dimmer?
The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.
Do I need a special dimmer for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
What dimmer switch do I need for LED lights?
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
Are LED lights bad for your eyes?
The “blue light” in LED lighting can cause damage to the eye’s retina and also disturb natural sleep rhythms, according to a new report. … “Exposure to an intense and powerful (LED) light is ‘photo-toxic’ and can lead to irreversible loss of retinal cells and diminished sharpness of vision,” it said.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
Does a fixture have to be dimmable or just the bulb?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. … Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed. If you install dimmable CFL lights, you’ll still need to check your dimmer to make sure it works with these types of bulbs.
Is it safe to cover LED lights?
Don’t cover LEDs with fabric.
It can be tempting to toss a shirt or scarf over those bright lights to block them from view, but it’s not a great idea. Fabric tends to trap heat, which could cause your electronic item to overheat and even become a fire hazard.
What makes LED dimmable?
In the case of PWM, dimmable LEDs work by creating a dimming effect. Unlike traditional lighting such as incandescent, dimmable LED bulbs don’t rely on voltage to dictate their level of brightness. Instead, they essentially rely on a cycle of being on and off.
Is daylight or soft white better?
Soft white (2,700 to 3,000 Kelvin) is warm and yellow, the typical color range you get from incandescent bulbs. … Daylight (5,000 to 6,500 Kelvin) has a more bluish tone. This light color will maximize contrast for colors, making it ideal for working, reading or applying makeup.
Why do dimmable LED lights flicker?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … Some switch manufacturers make dimmer switches that they claim to work well with LED bulbs. It’s a simple project to switch out a dimmer switch, and it might prevent you from having a seizure!
Can you put a regular bulb in a dimmer?
What is a Dimmer Switch? … Yes, you heard it right, one should never use normal light bulbs with dimmer switches because if you do so, the light will not perform well, it may appear fine in the beginning, but with time you will start noticing the difference in the intensity of the light.