Best answer: Why are my LED lights two different colors?

Why are my LED strip lights two different colors?

Typically, if the end of the LED strip is of a different brightness or color than the beginning of the strip, there is insufficient power being provided to the device.

How do I reset the color on my LED lights?

Step 1, Make sure all part of the LED strips kit are connects right and powered. Step 3, Press the “FADE7” button ,it will flash one second. Step 4, Turn on the LED strips again, press Red, Green, blue button one by one, it will change to its original color.

Why are my LED lights showing the wrong color?

The biggest reason behind wrong colors showing up on your LED lights is because the wires aren’t properly plugged in as they should. To fix this, first, you will need to make sure the black wire on the RGB strip connector is on the exact same side as the +12V is, which is normally found on one side of each strip.

What do you do if your LED lights won’t change color?

If your RGB strip lights won’t change colors try flipping your strip light around and reconnecting it. Incorrect Power Source – Make sure to double check which power source your lights require. LED strip lights are available in 12 or 24-Volt versions.

IT IS INTERESTING:  What color LED lights should you sleep with?

Why wont my LED lights turn red?

Most likely it is a poor connection on the Red wire, A standard DVM meter will test LEDS like these, just set to Ohms and place the leads across a red LED and see if it lights up. If that doesn’t do it, reverse lead polarity.

Do LED strips burn out?

Unlike incandescent bulbs which burn out and fluorescent lamps which begin to flicker, LEDs behave differently in that over time, they slowly and gradually lose their light output. … The industry, however, has somewhat arbitrarily decided that 30% light loss, or 70% of light remaining, should be that line in the sand.

Why is my LED lights DIY not working?

Could be, your lights are a series circuit, one of the LED isn’t seated correctly or maybe defective, causing the strip to fail. The LED are actually a DC device and are not like a filament light bulb. Could be your voltage is wrong for the LED to operate correctly.

Why is blue not working on my LED lights?

Either there’s a fault, or the battery is weak. Different coloured LEDs require different voltages to work properly. … It is probably due to low voltage. The blue LED requires a higher voltage to light than the others.

Lighting blog