Well, the answer depends: Yes, LED lights work on a dimmer when: You have “dimmable” LED light bulbs. You use an LED compatible dimmer.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Do you have to use a special dimmer switch for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
Can a dimmer switch be used with LED lights?
We suggest using modern dimmers made specifically for LED lights. Any older dimmers, or dimmers made for traditional lighting, may cause issues (e.g. flickering, buzzing) when used with LEDs.
How many LED bulbs can you put on a dimmer?
A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures. If you are meeting all of the electrical requirements of the dimmer and you are still having flicker issues, you can try adjusting the low-end trim.
How do I know if my LED lights are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.
What is the best dimmer switch for LED lights?
- Best Overall: Lutron Toggler Single-Pole/3-Way Light Dimmer. …
- Best Budget: GE Slide Dimmer Rocker Wall Switch, Single Pole. …
- Best Smart: Kasa Smart Dimmer Switch HS220. …
- Best for Bedrooms: Lutron Maestro LED+ Dimmer Switch, Single-Pole or Multi-Location. …
- Best for LED: Lutron Diva LED+ Dimmer Switch, Single-Pole or 3-Way.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
Why are my LED lights dim?
It could be a number of things. But most commonly, LED bulbs may flicker or dim in your home when there are voltage fluctuations in your home’s wiring. When electrical loads turn on and off in your home, this creates a change in voltage levels, which may cause the LED lights to occasionally dim or flicker.
Are LED lights bad for your eyes?
The “blue light” in LED lighting can cause damage to the eye’s retina and also disturb natural sleep rhythms, according to a new report. … “Exposure to an intense and powerful (LED) light is ‘photo-toxic’ and can lead to irreversible loss of retinal cells and diminished sharpness of vision,” it said.
Can any light be dimmable?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. … Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.
What is the highest wattage LED dimmer?
1. Leviton DSM10-1LZ Decora Universal Dimmer, 450-watt LED and CFL/1000-watt Incandescent
- Standard household dimmer switches range from 150W to 1000W, so the highest wattage for a dimmer switch is 1000 wattage.
- Dimmer switches are not dangerous if you use them correctly and if you don’t overload them.
How many amps do I need for LED strip?
To find the total maximum current draw per meter, we would multiply 60mA x 10 (ten segments per meter for the 30/LED per meter strip) = 0.6 Amps per meter OR 60mA x 20 (twenty segments per meter for the 60/LED per meter strip) = 1.2 Amps per meter.
How many watts can a dimmer handle?
How many watts can a dimmer handle in normal conditions? Dimmer switches can handle bulbs from 1 Watt to 1000 Watts. Some dimmers can even handle different bulb types in the same circuit.