Well, the answer depends: Yes, LED lights work on a dimmer when: You have “dimmable” LED light bulbs. You use an LED compatible dimmer.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Do you have to use a special dimmer switch for LED lights?
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
How do I know if my LED lights are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.
Can a dimmer switch be used with LED lights?
We suggest using modern dimmers made specifically for LED lights. Any older dimmers, or dimmers made for traditional lighting, may cause issues (e.g. flickering, buzzing) when used with LEDs.
Is it OK to use dimmable bulbs without a dimmer?
The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.
What is the best dimmer switch for LED lights?
- Best Overall: Lutron Toggler Single-Pole/3-Way Light Dimmer. …
- Best Budget: GE Slide Dimmer Rocker Wall Switch, Single Pole. …
- Best Smart: Kasa Smart Dimmer Switch HS220. …
- Best for Bedrooms: Lutron Maestro LED+ Dimmer Switch, Single-Pole or Multi-Location. …
- Best for LED: Lutron Diva LED+ Dimmer Switch, Single-Pole or 3-Way.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
Is it safe to cover LED lights?
Don’t cover LEDs with fabric.
It can be tempting to toss a shirt or scarf over those bright lights to block them from view, but it’s not a great idea. Fabric tends to trap heat, which could cause your electronic item to overheat and even become a fire hazard.
Can any light be dimmable?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. … Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.
Why are my LED lights dim?
It could be a number of things. But most commonly, LED bulbs may flicker or dim in your home when there are voltage fluctuations in your home’s wiring. When electrical loads turn on and off in your home, this creates a change in voltage levels, which may cause the LED lights to occasionally dim or flicker.
How many LED lights can I put on a dimmer switch?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.