The short answer: it depends. Not all LED lights are dimmable, so you need to check two things to be sure. … These are designed to work with a high wattage, so they don’t work for low wattage LED bulbs. You’ll need to replace this dimmer with a trailing edge dimmer, which is designed to work with low voltage LED lights.
Do you have to use a special dimmer switch for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Can you use a dimmer switch with LED lights?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
What kind of dimmer do I need for LED lights?
Generally speaking, you will be looking for either 600 watt max load or 1000 watt. When choosing dimmers for dimmable LEDs or CFLs, you should not load a dimmer higher than approximately 25% of the rated load for the dimmer.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
Is it OK to use dimmable bulbs without a dimmer?
The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.
How do I know if my LED lights are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.
Can any light be dimmable?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. … Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.
How many LED lights can you put on a dimmer?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.
Are LED lights bad for your eyes?
The “blue light” in LED lighting can cause damage to the eye’s retina and also disturb natural sleep rhythms, according to a new report. … “Exposure to an intense and powerful (LED) light is ‘photo-toxic’ and can lead to irreversible loss of retinal cells and diminished sharpness of vision,” it said.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
Do Lutron dimmers work with LED lights?
Lutron LED+ dimmers work with a broad range of dimmable LEDs, and all incandescent and halogen bulbs.
Is it safe to cover LED lights?
Uncovered LED’s Are Too Artificial
LED lighting in rooms can turn into more of a nuisance than fluorescent’s or CFL’s, especially if left uncovered. Using a small LED bulb to light a small room is a mistake for a few reasons: the glare, inadequate distribution and color temperature.