When it comes to replacing old incandescent bulbs with LEDs, a common question that customers ask is: “Can I use an LED bulb that has a higher wattage equivalent than my fixture allows?” The simple answer is yes, as long as the LED bulb uses less wattage than your fixture.
Can you put LED bulbs in regular fixtures?
LEDs can be used in any light fixture, as long as it’s not enclosed or air-tight, and is not an old-style dimmer system. Both these will shorten the lifespan of LED bulbs.
Can you use LED and incandescent bulbs in the same fixture?
Mistake #1: Mixing LED bulbs with incandescent bulbs is ok.
Mixing LED with incandescent lighting causes poor performance. If using both on the same circuit, your incandescent light will draw more power, causing the LED to flicker. The better advice would be, if you change one, change them all.
Why are LED lights not suitable for enclosed fixtures?
Heat is the enemy of LED light bulbs. Enclosed fixtures that don’t allow for proper ventilation can drastically affect the temperature of the LED bulb, causing it to overheat and shortening the lifespan of the bulb. …
Is it dangerous to use LED bulbs in enclosed fixtures?
Unfortunately, due to the heat entrapment of enclosed fixtures, not all LED light bulbs can be used. Or perhaps it is better to say that they should not be used. It may still be possible to use your regular LED bulb in the enclosed fixture, but with a shortened life span and the potential for premature dimming.
Do I need to remove ballast for LED lights?
LED technology does not require a ballast to regulate the amount of energy flowing to the lights. LED’s require less energy and can be sensitive to excess energy. … Additionally, removing the ballast will reduce energy usage and result in even great cost-savings as ballasts continue to draw more power than necessary.
Can I put a 100W LED bulb in a 60W socket?
For a 60-Watt fixture, you could use a 100W, 125W, or even 150W LED equivalent because they all consume under 60-Watts! … That means you could use a 150W LED equivalent bulb in a 60W socket and get more than three times the brightness of your old 60-Watt incandescent bulb.
Are daylight LED bulbs bad for you?
Unlike other energy-efficient types of lighting, the LED bulb does not emit polluting radiation and therefore does not pose a health hazard. It is important to note that LED bulbs operate at low voltage and are therefore considered safe compared to any other lighting systems (LED operates at low DC voltage 12 V).
Can LED bulbs catch fire?
LED lights do not emit light from a vacuum as most other bulb types do. … Overheating is one of the reasons a bulb could start a fire, but that is highly unlikely to happen with LED lights. They may feel hot to touch, but they produce light at a significantly lower temperature than other bulbs.
Which LED bulbs are best for enclosed fixtures?
The new Cree LED bulb features higher CRI light for better colors and it is suitable for use in enclosed fixtures—so you can experience beautiful light and colors anywhere in your home. And the new Cree LED bulb is a worry-free choice backed by a 5 year, 100% performance satisfaction guarantee.
Why are my LED bulbs not lasting?
Unlike incandescent light bulbs, LEDs don’t produce light using heat. This is part of what makes them so energy efficient. The downside is that their components can be sensitive to overheating, which can cause them to burn out prematurely.
Can LED lights cause cancer?
The ‘blue light’ emitted by LED light bulbs has been linked to breast and prostate cancer, according to a new study.
What kind of bulb goes in an enclosed fixture?
Most LED Bulbs carry a strong warning about using the bulb in a fully enclosed fixture. EarthLED has partnered with leading manufactures of LED Light Bulbs that can be safely used in enclosed fixtures for both industrial and commercial applications.
Do LED bulbs need ventilation?
Yes, as long as the fixture does not have a rubber gasket. LED bulbs need ventilation and a rubber gasket would prevent proper ventilation.