Do I need housing for LED recessed lights?

In new construction, recessed lighting is usually installed between ceiling joists, but you can retrofit recessed lighting almost anywhere in your home. If your ceiling is insulated, the recessed light fixtures must be IC housing rated, meaning they are approved for use near insulation.

How much space do you need between LED recessed lights?

If a 6-inch light has a spacing criteria of 1.5 and the ceiling height is 8 feet, the maximum space between each light should be 12 feet. This formula is critical for lighting a space because if the lights are too far apart, they will look like spotlights with big shadows between each other.

Can LED recessed lights be covered with insulation?

You could hire an electrician to replace each fixture with a sealed one rated for insulation contact (IC). … Now it will be safe to heap insulation onto that spot. I do recommend that you replace your bulbs with LEDs because they’re so energy-efficient, but make sure they’re rated for use in fully enclosed fixtures.

IT IS INTERESTING:  How do you power an LED bulb?

Do LED recessed lights need to be IC rated?

Even though they run cooler than other lightbulbs, LED recessed lights do still need to be IC rated. While LED bulbs produce significantly less heat than incandescent ones, they still do produce heat. … Just like any other sort of recessed lighting bulb, non-IC rated LED recessed lights can lead to fires.

Do you need a special fixture for LED lights?

LEDs can be used in any light fixture, as long as it’s not enclosed or air-tight, and is not an old-style dimmer system. Both these will shorten the lifespan of LED bulbs.

Should I use 4-inch or 6-inch recessed lights?

Choose one that will accommodate the height of your ceiling or the size of your wall. 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.

How far apart should 4-inch LED recessed lights be?

Where should recessed lights be placed in living room? The common rule is that 4-inch fixtures should generally be placed at least 4 feet apart and 6-inch fixtures about 6 feet apart.

Are LED recessed lights safe?

Since LED lights burn cooler than other types of light bulbs, you can potentially install them in places where other light bulbs will be unsafe. Since recessed wall lighting must be inset directly into walls or ceilings, there is always the potential for a fire hazard.

Are Canless recessed lights good?

The canless lights are more energy efficient, in that you do not have a big hole in your insulation. In Florida, so hot and humid.

IT IS INTERESTING:  Best answer: Can you use LED light bar on road?

Can recessed lighting cause fire?

Lights generate a lot of heat when they are in use. This heat can be a safety hazard in certain situations where recessed lighting is used. … This is important as non-IC rated recessed lighting in contact with insulation creates a fire hazard.

What is the difference between can lights and recessed lights?

Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling. Their diameter generally varies from 3” to 6.”

What are the best LED recessed lights?

16 Best LED Recessed Lighting

  1. Hyperikon 4-Inch Dimmable 9W LED Recessed Lights. …
  2. SANSI 15W LED Recessed Lights – Best 6 inch Dimmable. …
  3. Sunco Lighting Energy Star Dimmable Recessed Downlight. …
  4. Parmida LED Technologies 12W Dimmable Square Recessed Retrofit. …
  5. LemonBest 18W Square LED Recessed Lighting Kit.

Is recessed lighting outdated?

The old classic versions of recessed lighting are totally outdated. Even with the intended use for incandescent lighting- the LED light versions are designed better.

Do I need to remove ballast for LED lights?

LED technology does not require a ballast to regulate the amount of energy flowing to the lights. LED’s require less energy and can be sensitive to excess energy. … Additionally, removing the ballast will reduce energy usage and result in even great cost-savings as ballasts continue to draw more power than necessary.

Is it cheaper to leave LED lights on?

While turning off lights saves energy generally, the answer about whether you waste more electricity by turning lights on and off is that it depends. Sometimes it can actually be cheaper to leave a light on rather than turn it off. … They’re the least efficient light and 90% of the energy they use is heat.

IT IS INTERESTING:  Best answer: How do you clean LED lights?

Do I need a special dimmer for LED lights?

Use dimmers designed for LEDs

The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.

Lighting blog