While most LED bulbs are now dimmable, not all of them are and not all of them dim in the same manner Since LEDs consume such a low wattage, many types of dimmers do not function with LED in the same way that they do with high wattage load incandescents.
Do you have to use a special dimmer switch for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
What dimmer switch do I need for LED lights?
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
Will a regular dimmer work with LED lights?
LED light bulbs can be used in light fixtures controlled by dimmer switches, but you may well find that traditional dimmers may not work—or may work inadequately—with some LED bulbs. The bottom line is compatibility. Some LED bulbs are designed for use with standard dimmer switches, while others are not.
Why do you need a special dimmer switch for LED lights?
With LED bulbs you cannot limit the power to the driver, because if you do, the bulb would flicker or just turn off. A dimmer for LED lights is specially designed to send power and control signals to each type of electronic LED driver.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Why are my LED lights flickering on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
How many LED lights can I put on a dimmer switch?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
How do I know if my LED lights are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.