When installing low voltage under cabinet lights, you will have to take some special measures. You’ll need a transformer to convert your home’s voltage supply to a much Page 11 11 lower number, and if you plan to use any accessories, like dimmers, they’ll need to be compatible with your lighting system.
Do I need a transformer for LED lights?
All mains powered LED bulbs require a transformer. Depending on the bulb type, the transformer/driver may be built in to the bulb casing or may be located externally.
Where do you put a transformer under cabinet lighting?
1) Put the transformer inside the junction box behind the wall, with the low voltage wire running through the drywall and to the lights. 2) Attach the transformer underneath the cabinet, with the black/white green wire running through the drywall and into the junction box.
Do LED downlights have transformers?
They will have a transformer either in the ceiling or light fitting. Some LED bulbs, like the Philips Master LED range, have in-built circuitry that can deal with most (but not all) transformers, so you don’t have to change them. In other cases, you need to replace the transformer with an LED driver.
Do you need a special transformer for LED landscape lights?
In the world of low voltage landscape lighting, LED lamps have also become prevalent. In fact, they have allowed us to create larger lighting systems, often, without the need for larger transformers.
Is an LED driver a transformer?
AC LED drivers are actually no-minimum load transformers, meaning they could technically operate low-voltage halogen or incandescent bulbs as well. LEDs, however, cannot operate with conventional transformers because conventional transformers were not made to detect the low wattage of LEDs.
Can I replace 12V halogen with LED?
Yes, in many cases, you can simply replace your bulbs separately, one by one. Furthermore, LEDs can handle all hues of white light, so the warm yellowish light of halogen bulbs is perfectly within reach! …
What is the best type of under cabinet lighting?
Light-emitting diode (LED) lighting is the most popular and most energy-efficient type of under-cabinet lighting.
What kind of wire do you use for under cabinet lighting?
Copper wire and soldering is the best.
How do you hide under cabinet lighting wires?
One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet’s underside with staples. The wiring length itself should extend directly from the light to the wall.
Can I replace my halogen downlights with LED?
Retrofit your halogen bulbs with compatible low voltage or mains voltage LEDs. The former will require you to buy an LED driver (LED transformer). GU10 LED bulbs will work perfectly with your existing halogen fixtures but you’ll need to ensure that you buy dimmable LEDs if you have a dimmer switch.
What is the difference between a LED driver and a transformer?
What’s difference between LED driver and LED transformer? A transformer is by convention a double wound device, just ac in, ac out. Drivers are more sophisticated than that and usually give a dc output using a switched-mode system, also they have current regulating and monitoring circuits in them.
Do you need an electrician to change downlights?
Though you can change a light bulb, and this includes replacing the bulbs in your downlights. … But, when it comes to installing new downlight fittings and wiring them in, it’s best to give your expert Electrician To The Rescue a call.
What is the best low voltage transformer?
6 Best Low Voltage Transformers – Comprehensive Review
- Malibu 8100-9120-01 120 Watt Power Pack Low Voltage Transformer. …
- Lightingwill Waterproof Ip67 Led Power Supply Driver Transformer. …
- Sterno Home Paradise 50w 600 W Transformer. …
- Volt 300w Led Low Voltage Transformer (12v/15v) …
- Lightkiwi Multi-tap Landscape Lighting Transformer.
Can I use 12V transformer for LED?
FAQ – 12V Transformers and LED Compatibility. Magnetic transformers will generally work with all MR16 LED lights, albeit at the cost of efficiency and extra power consumption as was explored in this FAQ article.
What transformer do I need for LED lights?
All LED bulbs require a ‘driver’ (a special type of transformer) to work properly. Mains voltage LEDs (such as GU10 and B22 bulbs) have the driver built in to the bulb. MR16 and other 12V bulbs use an external driver.