# Frequent question: How many LED strips can be connected together?

Contents

We recommend no more than two consecutive strips connected end-to-end. If you do more, you need to add a separate power bus with higher gauge wire to run the strips down the line, or add additional power supplies down the line.

## Can you connect 4 LED light strips together?

Since they’re in the form of thin, flexible stickable strips, they can go literally anywhere. You can connect a number of LED strips together with the upper limit depending on the strip’s power output and your power source. Strip lights can be connected using connectors, cables or by soldering the connection joints.

## Can you connect 2 5m LED strips together?

Yes you can. If you wire your LED strip lights in a ring main, you’ll be able to connect approximately 10 metres of tape in a single run. (So that’s twice the normal 5m length). This is because the ring main will power your LED strip from both ends; it’s just as if you are powering 2 x 5m lengths independently.

## Can you connect different LED light strips together?

Yes, you can. Different color light strips can be used together. As long as the voltage and current used by each lamp strip are the same, they can be used together.

## Do LED lights attract bugs?

Bulbs that emit more short wavelengths of light (cool white/bluish color) will attract more bugs. … LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugs—so long as they emit longer wavelengths of light.

## Can you connect 3 LED light strips together?

Vetco recommends, as a general rule, not to connect more than three complete strips end-to-end without adding in extra, higher gauge power wire or additional power supply units down the line.

## How many amps do I need for LED strip?

To find the total maximum current draw per meter, we would multiply 60mA x 10 (ten segments per meter for the 30/LED per meter strip) = 0.6 Amps per meter OR 60mA x 20 (twenty segments per meter for the 60/LED per meter strip) = 1.2 Amps per meter.

## Can LED strip lights catch fire?

The LEDs will not give off enough heat to catch on fire or burn your bed, ever. This project could easily be the fusion of 2 well engineered products to do something cool without any risks!

## Can you leave LED light strips on all night?

Can you leave them on overnight? Yes, LED lights are ideal for leaving on for long periods of time due to their low power usage and very low heat output. They are more suited to use as a night light/ background accent light in general.

## Do LED lights go on the wall or ceiling?

We recommend having the lights go up your wall, but if you prefer to start the line of lights from the top of your wall, you will need LED strip clips to help hold up the power supply against the wall.

IT IS INTERESTING:  Which LED light is good for dark spots?

## Why are my LED lights 2 different colors?

If two primary color within the group of three LED elements are missing, this simply means that two surface-mounted components (resistors) have been damaged. Observe the PCB strip around the location of the missing primary color (red, green, or blue) and see if you see any damage.

## Why isn’t my remote working for my LED lights?

First make sure that the indicator light on the top of the remote is lighting up when you press a button. If it does not light up, your remote battery is likely the issue and you will need a new CR2025 battery to replace it. … Unplug the dimming wire from both the power supply and LED strip light (see figure 1).