# Question: How many LED recessed lights do I need?

Contents

Total wattage divided by 60 watts (or whichever wattage you need) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed.

## How many can lights for a 12×12 room?

The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.

## How many LED lights can you put on one switch?

Most circuits in a home allow for 15 to 20 amps, so you can safely connect 1400 to 2400 watts of lighting on one light switch. That’s enough for 23 to 40 60-watt bulbs or 280 to 480 5-watt LEDs.

IT IS INTERESTING:  Is LED headlight better than halogen?

## Should I use 4 or 6 recessed lights?

Choose one that will accommodate the height of your ceiling or the size of your wall. 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.

## How far apart should LED can lights be?

A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.

## Can you have too many recessed lights?

It often seems that installing recessed lights is a cure all, but they cannot properly wash light upon walls and all dark corners, which would bounce reflective light into the room. In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill.

## How many can lights for 15×15 room?

Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.

## How many LED recessed lights on a 20 amp circuit?

20 amps / . 4545 amps per light = 38 lights. Theoretically, you could use 38 lights.

## How much does it cost to install 4 recessed lights?

Most people install 4 to 6 recessed lights to fill the space. The national average cost for this project is between \$800 and \$2,000, with most people spending around \$1,650 to install 6 lights with a gimbal trim in an existing ceiling.

Recessed Lighting Costs.

IT IS INTERESTING:  Can you get g4 LED bulbs?
Recessed lighting installation costs
Maximum cost \$3,000

## Is 1mm cable OK for lighting?

1mm unless exceptionly long runs or other unusuall circumstances need larger. 1mm will be run at less than half its rating in most circumstances, if we consider 1.5 to be needed for lighting, then by the same logic for a 32 amp radial we should select cable suitable for about 60 amps !

## What is the difference between can lights and recessed lights?

Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling. Their diameter generally varies from 3” to 6.”

## Are recessed lights out of style?

Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.

## Is recessed lighting worth it?

Recessed lighting definitely has some great advantages that make it a great choice for your next lighting installation. When it comes to interior design, it’s an unobtrusive, effective way to light your spaces with class. … First of all, recessed lighting is perfect for low ceilings.

## How far apart should 4 inch LED recessed lights be?

Where should recessed lights be placed in living room? The common rule is that 4-inch fixtures should generally be placed at least 4 feet apart and 6-inch fixtures about 6 feet apart.

## Should recessed lighting be symmetrical?

Recessed lighting should be symmetrical or asymmetrical. Their main difference is the shape of the light spot emitted by the lamp. Because they have different lighting properties, they are suitable for different scenes, such as flat ceiling or vaulted ceiling.

IT IS INTERESTING:  How does a LED light bulb work?

## How far should recessed lights be from TV?

By placing small recessed lights about 18 inches off of the floor, you can create a low level of light without any reflection on the screen.