No, they are not universal.
Can I use a different remote for my LED lights?
Yes,One remote can control multiple receriver, you need to match code with receiver firstly,following the steps: plug in the LED strips light with the receiver and power supply, using remote, holding the “ON” 5 seconds, then LED strips light would flash,it means the remote has paired with the receiver successfully, rep …
Can you control any LED lights with your phone?
You can already turn on or off ordinary RGB LED strip lights and adjust their color, brightness, and lighting mode through a remote control. With smart LED strip lights, all of these settings can be adjusted on your phone.
Do LED lights have to be the same brand to connect?
Yes, as long they work at the same voltage. You connect them in parallel (even if of the same brand). … As long as the voltage and current used by each lamp strip are the same, they can be used together.
What does DIY mean on LED light remote?
Using the “DIY” buttons on the controller you can create custom colors. When you press one of the six DIY buttons, the color will change to white, from there, use the color coded arrows on the controller to change the color to whatever you like!
Can you connect 2 different brands of LED lights together?
The easiest way to connect two LED strips together is to use a LED light strip connecting clip. Two LED strips can be joined with each other using a male to male clip.
Why won’t my LED lights respond to the remote?
First make sure that the indicator light on the top of the remote is lighting up when you press a button. If it does not light up, your remote battery is likely the issue and you will need a new CR2025 battery to replace it. Disconnect your power source.
Why is my TV remote affecting my LED lights?
If both your TV remote and LED lights and remote are made in china and the TV remote is interfering with the LED strips it’s probbably because the LED IR reciever uses the same IR recieving thing so your TV remote is interfering with the LED strips. … The IR won’t be able to reach thr LED light strips’ IR reiciver.
How do I open my LED remote?
To open up the compartment where the battery is, you’ll want to squeeze the little black tab on the back bottom left of the remote in towards the larger black tab next to it. Squeeze the little tab in and pull the compartment out with your finger or nail, and it should slide out.
What app do you get for LED lights?
The Android App Dabble on your Smartphone is used to control the RGB LED Strip.
How do you connect Monster LED strip lights to your phone?
1: Press and hold the pairing button on the device and ensure that the LED indicator is now blinking RAPIDLY. 2: Open the Monster Smart app. From the add device list, click on “Lighting (WiFi)”. 3: Follow the on-screen instructions to confirm that the LED indicator is rapidly blinking.
Why are my LED lights two different colors?
If two primary color within the group of three LED elements are missing, this simply means that two surface-mounted components (resistors) have been damaged. Observe the PCB strip around the location of the missing primary color (red, green, or blue) and see if you see any damage.
How do you connect LED strip lights to mains?
How do I install my LED strip lighting? To get your strip light working, connect the transformer / driver to the strip light ( extending the cable with 2 core flex if necessary). Then you connect your transformer / driver to the mains via a plug or direct to the mains and you’re away.
How many LED strips can you connect together?
We recommend no more than two consecutive strips connected end-to-end. If you do more, you need to add a separate power bus with higher gauge wire to run the strips down the line, or add additional power supplies down the line.