A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Do you have to use a special dimmer switch for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
How do I know if my dimmer switch is led compatible?
Check Your Existing Dimmer
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
Can you put a dimmer switch on LED lights?
The short answer: it depends. Not all LED lights are dimmable, so you need to check two things to be sure. … These are designed to work with a high wattage, so they don’t work for low wattage LED bulbs. You’ll need to replace this dimmer with a trailing edge dimmer, which is designed to work with low voltage LED lights.
What is the best dimmer switch for LED lights?
- Best Overall: Lutron Toggler Single-Pole/3-Way Light Dimmer. …
- Best Budget: GE Slide Dimmer Rocker Wall Switch, Single Pole. …
- Best Smart: Kasa Smart Dimmer Switch HS220. …
- Best for Bedrooms: Lutron Maestro LED+ Dimmer Switch, Single-Pole or Multi-Location. …
- Best for LED: Lutron Diva LED+ Dimmer Switch, Single-Pole or 3-Way.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
Is it OK to use dimmable bulbs without a dimmer?
The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.
Can any light be dimmable?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. … Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
How many LED lights can I put on a dimmer switch?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.
What is an LED compatible dimmer?
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. … Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
Are dimmer switches worth it?
Energy Savings Offered by Dimmer Switches
Each option can help you save money by reducing your energy consumption. … When you are able to reduce the amount of light in a room, it is going to result in lower energy costs, as long as you keep the lights low.