Generally speaking, you will be looking for either 600 watt max load or 1000 watt. When choosing dimmers for dimmable LEDs or CFLs, you should not load a dimmer higher than approximately 25% of the rated load for the dimmer.
Do you have to use a special dimmer switch for LED lights?
Use dimmers designed for LEDs
The simple answer is to use only those dimmers that have been designed for LED loads. More of these dimmers are becoming available, and are designed to operate at far lower loads.
What type of dimmer do I need for LED lights?
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
What is the best dimmer switch for LED lights?
- Best Overall: Lutron Toggler Single-Pole/3-Way Light Dimmer. …
- Best Budget: GE Slide Dimmer Rocker Wall Switch, Single Pole. …
- Best Smart: Kasa Smart Dimmer Switch HS220. …
- Best for Bedrooms: Lutron Maestro LED+ Dimmer Switch, Single-Pole or Multi-Location. …
- Best for LED: Lutron Diva LED+ Dimmer Switch, Single-Pole or 3-Way.
Will a regular dimmer work with LED lights?
LED light bulbs can be used in light fixtures controlled by dimmer switches, but you may well find that traditional dimmers may not work—or may work inadequately—with some LED bulbs. The bottom line is compatibility. Some LED bulbs are designed for use with standard dimmer switches, while others are not.
What happens if you put a non dimmable LED bulb in a dimmer?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. … LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
How many LED lights can I put on a dimmer switch?
This means that if an incandescent dimmer is rated at 600W, you can’t assume you can use twenty-four 25W LED fixtures. A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures.
How do you dim LED lights without a dimmer?
How to Dim Lights Without a Dimmer
- Turn on the switch and it will shine at 100% capacity.
- Turn it off.
- Turn it on again and it will shine at 50% capacity.
- Turn it off again.
- Turn it on the third time and it will shine at 25% capacity.
- Turn it off again.
- Turn it on again and it will shine at its 100% capacity again.
Do Lutron dimmers work with LED lights?
Lutron LED+ dimmers work with a broad range of dimmable LEDs, and all incandescent and halogen bulbs.
How do I choose an LED dimmer switch?
Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.
Are dimmer switches worth it?
Energy Savings Offered by Dimmer Switches
Each option can help you save money by reducing your energy consumption. … When you are able to reduce the amount of light in a room, it is going to result in lower energy costs, as long as you keep the lights low.
How do I know if my LED lights are dimmable?
Look for an “LED” or “LED LAMP” marking on the bulb as well. Most residential LED light bulbs are dimmable, but some are not. In addition, the amount they can dim, or “dimming range”, also varies based on the light bulb used.